Відео

First of all, thanks for this. You saved me time and money. Secondly, dont try this unless you are pretty seasoned mechanic. You need to be in pretty good shape to pull this off. There isnt much room to get leverage on the ratchet. I didnt help things waiting til 260k to replace the plugs. They were almost seized. Neeeded to be worked back and forth carefully. Not something you want to do on the back 3 plugs.. but again, thanks sir. Id buy you a beer if I could.

So I got everything done today to the point of reassembling the housing with the new bearing. I spun it by hand and it sounds like this ua-cam.com/users/shortsNkWunFj6JJY I am thinking this is not how it should sound. It sounds a bit like the whine from before. The other smaller bearing spins smoothly with no noise with the old bearing removed and before I reassembled with the new bearing.

Nice video! I get the same symptoms when my pump gets buildup.

At least it wasnt a great quality fish , accidents happen mate

Is this RAV4 a V6 or 4CYL?

This is what I need to do as well since I have a 2013 xle with nav. However, this video is simply not fully clear or complete on the connections.

Nice party where was this at?

The drummer Souky and u all were great but what happened to the dancers? 😆

Damn ur great as my bro Pouky. 👍🌶👍

Could you send me the plans and materials list for the system please. Thanks

Sorry this happened. I lost one of my fish yesterday too. I think it was swim bladder issue but happened so fast.

Never assume whats inside the transmission is the correct level unless you bought the car new. It might be overfilled by a previous mechanic. I would leave the drain plug out and the plastic straw in. When you refill with fresh fluid, any extra fluid will leak out the plastic overflow tube. This is the correct amount.

I would like you to send copy of the 3 barrel system await copy to get started Brent

Thank you for this video Now I have a question when do you buy those RCA cables with taps on the other end

Sorry to hear about your lost. That's an unfortunate accident. Why wasn't the mesh grill there in the first place? Anytime there is a place for a fish to explore, they will go there regardless if there is danger or not. They don't know danger until it is too late. Make sure that the grill opening isn't big enough for any other fish to fit through.

Too bad .. sorry.. at least its just the one

I fix the problem .. just set a new rear differential coupler

Hi sir..for this system dont u need crush coral? And why crush coral r not included?

Woah what a nostalgia trip! I remember pointing and laughing at the captive whales when I was but a 6 year old grasshopper. I would mock their prisons and pretend to swim away without them. thanks for the great memories!

I’m looking at buying a 2005 MR2 Spyder and this video helped. Do you still have yours?

nice video mate

Nice filter system.

The pump causes the turbulence and thus bubbles. Perhaps a vacuum pump can work better.

I also drain as much out as I can get out and then use window screen over the shop vac so it does not suck the media up and shop vac the bottom of the barrels before filling back up

I do it your way you have to agitate the media to get all the particles off

Thanks for the video. I just built a 2 stage filter system myself. A few of things I've learned are to install a valve at the pump outflow to slow down the initial filter housing fill and purge out any air bubbles, before opening the valve to full flow. I also put a second piece of wood on top of the frame so that I can flip the whole thing over at the end to thoroughly drain the wine and reduce waste- Fill right side up, finish upside down. Finally, I always purge the filter system and the receiving carboy with co2, so that any bubbles formed will not contain any oxygen. Best of luck and Happy Winemaking.

BlaCK ASS DRUMMER!

Nice spoilers man where did you get them from?

Awesome video! I built the same filter. What uv are you using? And what air pump and stone are you using? Thanks

Your mechanic shop is not it NYC ? I wish you were in NYC to fix my car same problem

I was looking for a vid on how to access the belt for this model and this was the only teardown vid I could find on UA-cam, not quite a belt replacement vid but helped a lot! Thanks

Have You got a video as how it was build Please ? Thank You

Why did you put a screen on the front inlet? You want it open for debry

Why do you need a moving bed in this system? I like to setup for the UV light, pretty neat!

I didn't expected this but it actually worked. Low quality UA-cam video's from 10+ years ago are the best!

I've been cleaning my skimmer ever few days too. I have a Burr oak over the pond. It's been dropping a lot of "flowers" too. Question, why do you have a screen on the skimmer box inlet? With your skimmer design, I would think it would be very fish friendly as they can swim in and out. Your plants are looking nice. Mine are only just getting going in most cases.

How much media do you have in the static barrels?

I did this on a 2012 sienna and only got 1 qt and 147 ml out. Plus l used a $7 manual bottle pump.

👍👍

Do you have a video how you made that

You don't have to blow air back in. This type of system is set up to settle. Yiur drains are set up perfect. But mixing up just stirs it up and breaks up your bio colony on the k1. If you just open each valve for 5 or 10 sec each you will draw all the muck from bottom of tanks and not lose much water. I built one like this a while back and this is how I do mine. Yiu want to bacteria colony on the media to help keep nitrogen down. Just my 2 cents but it is a nice looking build. Try next time just pulling much from bottom without aeration and yiu will see you get much more muck and lost less water. Also use the drain off for plants in yard as plants love the fish emulsion

Good Video, If you're not making modifications, you're not watching your fish or your pond I personally am making simple changes all the time

I like who your pond look!!!!!!

Hello Sir. I hope you are well. You have done a Awesome job. I like the modification. It is always good when the Pond is fully running again. I liked that you finished the video off by feeding the fish. The 4th like is now up. Thankyou very much for sharing. Have a great Week and take care, Sir. 🤙🏼🙂🤙🏼❤️

Nice modification on the your skimmer basket. Why does you pond overflow? From rain?

Hi,I’m interested in purchasing the plan for this filtration system and material list

👍

Hey brother can you tell me which seal needs to order for the right and left side differential to connect to the axle because my car left and right leaking needs to replace the seal thanks

Its do to the end on the racking cane makimg the wine bounce back upwards just use a longer tube and coil it at bottom so when it comes out its just flowing unrestricted

I like the high amount of air you're getting into the wine that's not good